Low work table vertical Injection Molding Machine JTTR-1200R
Specfication:
| Model | JTTR-1200R | ||
| injection system | Screw Diameter | mm | 40 45 50 |
| Injection Pressure | kg/cm2 | 2327 1839 1490 | |
| Theoretical Shot Volume | cm3 | 263 332 410 | |
| Max Shot Weight | g | 237 299 369 | |
| Injection Rate | cm3/sec | 107 135 202 | |
| Screw Stroke | mm | 215 | |
| Screw Speed | rpm | 158 | |
| Heating Capacity | kw | 9.5 | |
| clamping system | Clamping Force | tons | 123 |
| Opening Force | tons | 13.4 | |
| Min Mold Height | mm | 300 | |
| Opening Stroke | mm | 320 | |
| Max Open Daylight | mm | 620 | |
| Mold Dimension | mm | 525*400 | |
| Rotary Table Diameter | 1200 | ||
| Ejector Force | tons | 2.7 | |
| Ejector Stroke | mm | 75 | |
| other | Motor Power | kw | 18.4 |
| Sliding Table Stroke | mm | 600 | |
| Machine Dimension | m | 2.6*2.0*2.9 | |
| Machine Weight | tons | 5.5 |
Feature:
Low work table vertical injection molding machine JTT-1200R
Clamping force: 120T
Max shot volume: 410cm3
Low work table is friendly for workers
Vertical clamping, vertical injection
Easy to set torque , speed, deceleration distance and stand number segmentation
SERVO motor control rotary table, forward-rotating, reverse-rotating, forward and reverse alternative rotating.
2 stations, 3 stations , multi-station(one up die, two or four down die), easy for operate insert parts, improve productivity machine station number decide lower mold number, eg: 3 staitons have one upper mold 3pcs lower mold
Optional energy-saving motor
Sample:
